User Manual Q&AAnswer
Mar 04, 2025 - 07:57 PM
To assemble the detachable shaft on the RAIDER Pro RDP-EBC07 Electric Brush Cutter, please follow the instructions below:
1. Start by aligning the arrow marks on the upper and lower shafts.
2. Insert the lower shaft into the upper shaft until the arrow marks are aligned.
3. Rotate the lower shaft clockwise until it locks into place.
4. Ensure that the shaft is securely locked by giving it a gentle tug.
5. Attach the handle to the upper shaft by aligning the holes on the handle with the holes on the shaft.
6. Insert the screws provided through the holes and tighten them securely using a screwdriver.
7. Attach the guard to the cutting head by aligning the holes on the guard with the holes on the head.
8. Insert the screws provided through the holes and tighten them securely using a screwdriver.
9. Your RAIDER Pro RDP-EBC07 Electric Brush Cutter with the detachable shaft is now ready for use.
For more detailed instructions and illustrations, please refer to the owner's manual that came with your product.
Add New Comment