Answer

Mar 04, 2025 - 07:44 PM
To attach the Fillauer 1910072 ProPlus ETD Hook with Microprocessor to your forearm, follow these steps:
1. Before attaching the ETD to your forearm, ensure that the power switch located at the base of the ETD is switched OFF.
2. Insert the quick disconnect wrist on the ETD into the wrist on your forearm. Push it in firmly while rotating the ETD until you hear an audible click.
3. It is advisable to rotate the ETD in both directions several clicks and then attempt to pull the ETD off to ensure it has attached firmly.
4. Once the ETD is securely attached, push the power switch in the opposite direction to turn the ETD ON. It is now ready for use.
5. To disconnect the ETD, first turn it OFF, then rotate it in either direction until you feel a slightly more difficult click. Overcoming this click will disconnect the ETD from your forearm, allowing interchangeability with another terminal device.
Please refer to the Fillauer 1910072 ProPlus ETD Hook with Microprocessor Instruction Manual for more detailed instructions and illustrations.
Add New Comment