User Manual Q&AAnswer
Mar 04, 2025 - 07:41 PM
To install the HIKVISION DS-1281ZJ-M Inclined Ceiling Mount Bracket for Dome Camera on a flat wall, please follow these steps:
1. Ensure that the wall is flat and capable of supporting over 3 times the weight of the camera and the mount.
2. Prepare the necessary tools for installation, including a drill, screws, and a screwdriver.
3. Place the bracket against the wall at the desired installation location.
4. Mark the positions for drilling holes on the wall using a pencil or marker. Make sure to align the bracket properly.
5. Use a drill to create holes at the marked positions on the wall.
6. Insert wall anchors into the drilled holes to provide additional support.
7. Align the bracket with the drilled holes and attach it to the wall using screws and a screwdriver.
8. Ensure that the bracket is securely attached to the wall.
Note: It is important to use waterproof rubber for outdoor applications to protect the camera and the bracket from moisture. The maximum load capacity of the bracket is 4.5KG, so make sure not to exceed this weight limit.
For more detailed instructions and illustrations, please refer to the user manual provided with the HIKVISION DS-1281ZJ-M Inclined Ceiling Mount Bracket for Dome Camera.
Add New Comment