User Manual Q&AAnswer
Mar 04, 2025 - 07:36 PM
To install the turning connectors on the LIVING basics Pet Playpen, please follow these steps:
1. Take out the turning connector from the accessories.
2. Place the turning connector at one of the corners of the playpen.
3. Align the holes on the turning connector with the corresponding holes on the mesh panel.
4. Insert the provided screws through the holes and tighten them securely using a screwdriver.
5. Repeat the above steps for the remaining three corners of the playpen, ensuring that the turning connectors are installed at the designated corners as shown in the manual.
Note: The turning connectors are essential for connecting the mesh panels and providing stability to the playpen structure.
Please refer to the installation instructions in the LIVING basics Pet Playpen Instruction Manual for visual illustrations and additional details on the installation process.
Add New Comment