User Manual Q&AAnswer
Mar 04, 2025 - 07:28 PM
To set up the Logitech Rally Bar Mini + Tap IP Video Conferencing System, follow these steps:
1. Before you begin, make sure you have the following:
- Meeting Room System Credentials/activation code
- Ethernet Cable(s)
- PoE enabled network OR PoE Injector and network (Ethernet or WiFi)
- Connect to PoE enabled network or PoE Injector (not included)
2. Assembly:
- Open the box and familiarize yourself with the components.
- Place the Rally Bar Mini and Tap in the desired location.
- Use the included thumbscrew to attach the bottom cover to the Rally Bar Mini.
- Mount the Rally Bar Mini and Tap on a VESA MIS-D 100x100mm compatible mount if desired.
3. Appliance Mode:
- Check the supported apps for Appliance Mode at www.logitech.com/rallybarmini.
- Follow the on-screen prompts on the 10.1" Touchscreen to complete the setup process.
4. Accessories:
- Visit logitech.com/prosupport/tap-IP-room-solutions for information on compatible accessories.
Please refer to the Logitech Rally Bar Mini + Tap IP Video Conferencing System User Guide for more detailed instructions and troubleshooting tips.
Add New Comment