User Manual Q&AAnswer
Mar 04, 2025 - 11:39 AM
To connect the atomi smart Smart WiFi LED Floodlight to the app, please follow the instructions provided in the Connection User Guide. This guide will provide you with step-by-step instructions on how to establish a connection between the floodlight and the app.
Here are the general steps you can follow:
1. Make sure you have downloaded and installed the atomi smart app on your smartphone or tablet. The app is available for both iOS and Android devices.
2. Ensure that your WiFi network is working properly and that your smartphone or tablet is connected to the same network.
3. Open the atomi smart app and create an account if you haven't already done so. Follow the on-screen instructions to set up your account.
4. Once you have logged in to the app, follow the instructions in the Connection User Guide to put the floodlight into pairing mode. This usually involves pressing and holding a specific button on the floodlight for a certain period of time.
5. In the app, navigate to the device pairing section and follow the prompts to search for and connect to the floodlight. This may involve selecting the appropriate WiFi network and entering the network password.
6. Once the app successfully connects to the floodlight, you should be able to control it remotely, adjust settings, and set up automation features.
Please note that the specific steps may vary slightly depending on the version of the atomi smart app and the floodlight model you have. It is always recommended to refer to the Connection User Guide provided with your specific product for the most accurate and up-to-date instructions.
Remember to prioritize safety during installation and follow the cautionary and warning statements mentioned in the installation guide. If you are unsure about any aspect of the installation process, it is advisable to consult a professional familiar with electrical installations.
Add New Comment