How do I adjust the heat settings on the Comfort Zone CZ457E Series Ceramic Tower Heater? (Comfort Zone CZ457E Series Ceramic Tower Heater Instruction Manual)

Answer

manuals.plus

Mar 04, 2025 - 11:27 AM


To adjust the heat settings on the Comfort Zone CZ457E Series Ceramic Tower Heater, follow these steps:

1. Press the Power button once for LOW heat mode. The light under the "80" will illuminate. The heater will turn on in LOW heat mode with the thermostat set at 80°F.

2. Press the Power button a second time for HIGH heat mode. The light under the "80" will stay illuminated. The thermostat temperature light stays the same, there is no change.

3. Press the Power button a third time to turn the heater off. After the fan shuts off, the power indicator light will turn on again.

Note: When the unit is powered off, the fan may continue to run for a while to cool off the ceramic elements and dispense any retained heat. The unit will shut off automatically. Remember to unplug the heater when not in use.

Additionally, the Comfort Zone CZ457E Series Ceramic Tower Heater has an ENERGY SAVE mode. Press the ENERGY SAVE button to turn on the Energy Save mode. The ENERGY SAVE indicator light will illuminate, and the temperature lights will turn off. The thermostat temperature will automatically change to 68°F. The heater will turn on in HIGH heat mode if the room temperature goes below 60°F, in LOW heat mode if the room temperature is between 60°F and 68°F, and go into STANDBY mode if the room temperature is above 68°F.

Please refer to the instruction manual for more details and safety precautions.