User Manual Q&AAnswer
Mar 04, 2025 - 11:25 AM
To adjust the thermostat on the Comfort Zone CZ290 Series Portable Industrial Heater, follow these steps:
1. Turn on the heater by turning the POWER xxxx to the "ON" position.
2. Locate the THERMOSTAT CONTROL xxxx at the rear of the heater.
3. Turn the THERMOSTAT CONTROL xxxx clockwise (towards the "+" symbol) to increase the heat output and raise the temperature.
4. To decrease the heat output and lower the temperature, turn the THERMOSTAT CONTROL xxxx counter-clockwise (towards the "-" symbol).
5. Once the room reaches the desired temperature, slowly rotate the thermostat xxxx counter-clockwise until the heater shuts off (you should hear a faint "click").
6. Leave the thermostat at this setting to automatically maintain the temperature.
7. To turn the heater off, turn the POWER xxxx to the "-" position and unplug the heater when not in use.
It's important to note that during the initial use of the heater, you may experience a slight odor or smoking. This is normal and will go away after a few minutes of use. Additionally, always ensure the heater is placed on a smooth, non-combustible surface and keep combustible materials at least 3 feet away from the front of the heater.
For more detailed instructions and safety precautions, please refer to the Comfort Zone CZ290 Series Portable Industrial Heater manual.
Add New Comment