User Manual Q&AAnswer
Mar 04, 2025 - 11:24 AM
To measure AC voltage using the ANENG M167 Smart Digital Multimeter, please follow these steps:
1. Ensure that the multimeter is turned off before starting the measurement.
2. Insert the measuring pen into the corresponding AC voltage measurement jack on the multimeter. The red pen should be inserted into the VΩmA jack and the black pen into the COM jack.
3. Turn on the multimeter by pressing the power button.
4. Set the rotary dial to the AC voltage measurement mode. It is usually denoted by the symbol "~" or "V~" on the dial.
5. Hold the measuring pens and touch the test leads to the points where you want to measure the AC voltage. Ensure proper contact and avoid touching any live wires with your hands.
6. Read the measured AC voltage value on the LCD screen. The backlight feature can be used to enhance visibility in low-light conditions.
7. After completing the measurement, turn off the multimeter to conserve battery power.
Please refer to the user manual (included in the packaging) for more detailed instructions and safety precautions.
Add New Comment