User Manual Q&AAnswer
Mar 04, 2025 - 11:20 AM
To assemble and install the ET2 Contemporary Lighting E20361 Half Moon Medium LED Pendant, please follow the steps outlined in the user manual provided.
1. Before getting started, carefully read the instructions and ensure you have all the required contents for assembly.
2. Choose a clean, level, and spacious assembly area to avoid damaging the product.
3. Open the package with a sharp tool like a cutter knife, being careful not to damage the components inside.
4. Remove all packaging materials and retain them for future use.
5. Keep all hardware parts and packaging out of reach of small children.
6. Assemble the product in close proximity to where you intend to position it.
7. Do not over tighten the screws and bolts as this may damage the threads.
8. Do not let children play with the product to avoid the risk of suffocation.
For wiring and installation:
1. Disconnect the product from the power source before assembling or cleaning to avoid the risk of shock.
2. Switch off and unplug the product, allowing the bulb to cool before replacing or cleaning.
3. Only use the recommended bulb type and do not exceed the maximum wattage to prevent fire hazards.
4. Do not plug the product in if the cord is torn or frayed.
For cleaning and maintenance:
1. Use talc powder on polished finishes to reduce the appearance of fingerprints and smudges.
2. Use appropriate cleansers, such as glass cleaner, acrylic polish, or wood polish, for respective shade surfaces.
3. Clean with a soft cloth and mild detergent, avoiding abrasive cleaners.
4. Periodically (every 90 days), ensure that all screws are fully tightened.
5. Avoid prolonged exposure to heat sources, as it may cause glazing, melting, scorching, or color fading.
Please refer to the user manual for any additional information or specific instructions related to the ET2 Contemporary Lighting E20361 Half Moon Medium LED Pendant.
Add New Comment