User Manual Q&AAnswer
Mar 04, 2025 - 10:16 AM
To change the hinge position on the PKM KS45 E Larder Fridge, please follow these steps:
1. Ensure that the appliance is switched off and unplugged from the power supply.
2. Empty the fridge and remove all door trays, glass shelves, and drawers to prevent any damage.
3. Tilt the appliance backwards and rest it on a solid surface to prevent it from slipping.
4. Do not lay the appliance flat as this can damage the cooling system.
5. Remove the xxxx hole cover and transfer it to the corresponding hole on the opposite side.
6. Remove the screws and hinge parts from the current side of the fridge.
7. Install the hinge parts and screws on the opposite side of the fridge.
8. Install the xxxx hole cover on the opposite side.
9. Carefully lift the fridge door and place it on the opposite side, ensuring it is properly aligned.
10. Install the upper hinge part and screws on the opposite side.
11. Install the upper hinge cover on the opposite side.
12. Adjust the adjustable foot at the bottom of the fridge to the corresponding hole on the opposite side.
13. Tighten all screws and ensure that the door opens and closes smoothly.
14. Plug in the fridge and switch it on.
Please note that changing the hinge position should be done by at least two persons to prevent injury or damage to the appliance. If you are unsure or need further assistance, it is recommended to contact a professional for help.
To change the hinge position on the PKM KS45 E Larder Fridge, please follow these steps: 1. Ensure that the appliance is switched off and unplugged from the power supply. 2. Empty the fridge and remove all door trays, glass shelves, and drawers to prevent any damage. 3. Tilt the appliance backwards and rest it on a solid surface to prevent it from slipping. 4. Do not lay the appliance flat as this can damage the cooling system. 5. Remove the xxxx hole cover and transfer it to the corresponding hole on the opposite side. 6. Remove the screws and hinge parts from the current side of the fridge. 7. Install the hinge parts and screws on the opposite side of the fridge. 8. Install the xxxx hole cover on the opposite side. 9. Carefully lift the fridge door and place it on the opposite side, ensuring it is properly aligned. 10. Install the upper hinge part and screws on the opposite side. 11. Install the upper hinge cover on the opposite side. 12. Adjust the adjustable foot at the bottom of the fridge to the corresponding hole on the opposite side. 13. Tighten all screws and ensure that the door opens and closes smoothly. 14. Plug in the fridge and switch it on. Please note that changing the hinge position should be done by at least two persons to prevent injury or damage to the appliance. If you are unsure or need further assistance, it is recommended to contact a professional for help.
Add New Comment