User Manual Q&AAnswer
Mar 04, 2025 - 09:38 AM
To clean the filter of the , follow these steps:
1. Switch the power off and unplug the power cord.
2. Open the upper housing unit for easy access to components.
3. Carefully lift out the water tank.
4. Pull out the air inlet cover, which is attached with an activated carbon filter.
5. Pull out the basin and lift up the disc stacks.
6. Clean the three-layered filter using the brush attachment of a vacuum cleaner. Do not wash the filter.
7. Rinse the tray every 2 weeks with warm water. You can put the tray in the dishwasher.
8. If the disc set is heavily soiled, clean it with warm water and a soft cloth. It can also be cleaned in the dishwasher.
9. If there is any mineral deposit buildup on the disc stacks, soak them in hot water with white vinegar for approximately 30 minutes. Rinse with warm tap water after cleaning.
10. After cleaning, reassemble the components and ensure they are dry before using the humidifier again.
It is important to regularly clean the filter and other components to maintain hygienic and fault-free operation of the air purifier and humidifier. Refer to the instruction manual for more detailed instructions and safety precautions.
Add New Comment