User Manual Q&AAnswer
Mar 04, 2025 - 09:35 AM
To install the evonicfires Banff Electric Fire, please follow these steps:
1. Remove the two bottom mounted transit brackets from the appliance.
2. xxxx on the IEC Clip to the bottom back of the case using the provided screws.
3. Determine the desired height and position for the appliance and secure the wall bracket to the wall using the provided wall plugs and screws. If you are not installing on a masonry wall, use appropriate fixings.
4. Hang the appliance on the wall by slotting the tabs of the wall bracket into the slots on the back of the appliance.
5. Connect the appliance to the mains power supply.
6. The appliance is now ready to use.
Please note that these instructions are a summary and it is important to refer to the complete instruction manual for detailed installation steps and safety guidelines.
Add New Comment