User Manual Q&AAnswer
Mar 04, 2025 - 09:26 AM
To connect the nRuiT Powerporter 15.0 9 Koh Solar Energy Household Battery Storage to an inverter, please follow these steps:
1. Make sure the inverter is turned off and the power cables are disconnected.
2. Connect the ring terminal of the power cables to the positive and negative poles of the DC terminal of the inverter.
3. Connect the negative quick plug connector of the power cables to the negative port of the Powerporter.
4. Connect the positive quick plug connector of the power cables to the positive port of the Powerporter.
5. Ensure that the power cables are securely connected to both the inverter and the Powerporter.
6. Turn on the inverter and check for proper operation.
Note: It is important to follow the instructions provided in the user manual and ensure that the power cables are connected correctly to avoid any damage or safety hazards. If you are unsure or need further assistance, it is recommended to consult a qualified installer or contact nRuiT technical support for guidance.
Add New Comment