Answer

Mar 04, 2025 - 08:53 AM
To install the stand for the Denver LED2472 HD LED TV, please follow these steps:
1. Place the TV face down on a soft and flat surface, such as a blanket or foam, to prevent any damage to the TV.
2. Take the stand and align it with the neck of the TV set.
3. Attach the stand to the TV by using the supplied screws. Make sure to tighten the screws securely, but be careful not to over-tighten them.
4. Once the stand is securely attached, carefully lift the TV upright and place it in the desired location.
Please note the following warnings:
- Do not tilt the TV to the front or back, as this may damage the stand.
- Do not tilt the TV to the left or right, as this may also damage the stand.
For visual reference and additional information, you can refer to the user manual of the Denver LED2472 HD LED TV. The manual can be downloaded from the Denver website (Denver.eu) by entering the model number LED-2472 in the search field. On the product page, you will find the manual under the "Downloads" section.
Add New Comment