Answer

Mar 04, 2025 - 08:15 AM
To clean the RHFP1000 Russell Hobbs Frying Pan, follow these steps:
1. Always remember to unplug the unit from the electrical outlet before cleaning.
2. Ensure that the temperature dial is set to the "OFF" or "0" position.
3. Always unplug the thermostat control/probe from the unit before cleaning. Remove the thermostat control/probe by gripping the control on either side firmly and pulling. Do not pull on the cord to remove the thermostat control/probe from the pan.
4. Clean the body of the frying pan while it is still warm after use. Clean only when the frying pan is comfortable to the touch. The frying pan should be cleaned with a damp cloth.
5. Do not let water enter the appliance.
6. Clean the frying area of the unit with a damp sponge. Should food not come off immediately, pour some water into the pan and allow it to soak for a few minutes, and then try again.
7. Do not scrub the unit as this will damage the non-stick coating. Always ensure that the socket is completely dry before inserting the thermostat control/probe.
8. Do not use bleach or other abrasive substances or solvents to clean your appliance as it can be damaging to the finish.
9. Do not immerse the unit in water or any other liquid, or hold it under a running tap.
10. To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in soapy water or mild non-abrasive cleaner. Rinse and dry with a clean, dry, soft cloth.
11. After cleaning, completely wipe the frying pan dry with a soft cloth. Clean the frying pan after each use.
12. To maintain a longer life of the non-stick coated surface on the inside of the pan, apply a very light coat of cooking oil to the non-stick coating with a paper towel before storing. Repeat periodically.
Please refer to the instruction manual for more detailed information on cleaning and maintenance.
Add New Comment