User Manual Q&AAnswer
Mar 04, 2025 - 06:53 AM
Installation of the HYDAN SAFES Standard Round Door Underfloor Safe is relatively straightforward. Here is a step-by-step guide to help you with the installation process:
1. Choose a suitable location: Select a secure and easily accessible location for the safe installation. Ensure that there are no obstructions or obstacles in the area.
2. Prepare the floor: Clear the area where you plan to install the safe. Make sure the floor is clean, level, and free from any debris.
3. Mark the installation spot: Place the safe on the floor in the desired location. Use a pencil or marker to mark the position of the safe's outer edges.
4. Cut the floor: Using appropriate tools, cut a hole in the floor according to the marked dimensions. Ensure that the hole is slightly larger than the safe's external dimensions to allow for easy installation.
5. Prepare the safe: Remove the safe's door and any packaging materials. Check for any damage or defects before proceeding.
6. Lower the safe into the hole: Carefully lower the safe into the hole in the floor. Ensure that it fits securely and aligns properly with the floor surface.
7. Secure the safe: Use the provided installation instructions to secure the safe in place. This may involve using bolts, screws, or other fastening mechanisms to anchor the safe to the floor.
8. Test the safe: Once the safe is securely installed, test the door's locking mechanism to ensure it functions properly. Test any combination or digital locks to ensure they are set up correctly.
9. Complete the installation: Replace the safe's door and make any necessary adjustments or final touches to complete the installation process.
Please note that these are general installation guidelines. It is essential to refer to the specific installation instructions provided with the HYDAN SAFES Standard Round Door Underfloor Safe for detailed and accurate instructions.
Add New Comment