User Manual Q&AAnswer
Mar 04, 2025 - 04:01 AM
To assemble and install the HANOVER HEMMILENE-3CH Emmilene 3-Light Pendant Chandelier, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Unpack all the components of the chandelier and ensure that you have all the necessary parts.
2. Begin by attaching the metal sphere frame to the ceiling canopy using the provided screws. Make sure the frame is securely fastened.
3. Next, thread the electrical wires through the center of the metal sphere frame.
4. Attach the crystal clear beading to the metal sphere frame. The beading should hang down from the frame evenly.
5. Connect the wires from the chandelier to the corresponding wires in your ceiling junction box. Follow the color-coded instructions in the manual for proper wiring.
6. Once the wiring is complete, carefully lift the chandelier and align the holes in the metal sphere frame with the screws on the ceiling canopy. Securely tighten the screws to hold the chandelier in place.
7. Install the recommended Type B / E12 Candelabra Base light bulbs into the sockets of the chandelier. Make sure not to exceed the maximum wattage of 60 watts per bulb.
8. Finally, turn on the power and test the chandelier to ensure it is functioning properly.
Please note that if you are not experienced with electrical work, it is recommended to contact a licensed electrical contractor for assistance with the hardwire installation.
For any further assistance or warranty-related inquiries, you can reach out to Hanover's customer service, as mentioned in the product overview.
Add New Comment