User Manual Q&AAnswer
Mar 04, 2025 - 03:58 AM
To pair the JLAB B09RG6D2B7 Go Air Sport Earbuds with your Bluetooth device, follow these steps:
1. Take the earbuds out of the case and remove any stickers. Place them back in the case and close the door.
2. Check the red light on the case to ensure that the earbuds are charging.
3. Remove the earbuds from the case. One of the earbuds will blink blue/white, indicating that it is ready to pair.
4. On your Bluetooth device, go to the Bluetooth settings and select "JLab GO Air Sport" to connect.
5. Once connected, you will hear a voice prompt saying "Bluetooth connected," and the earbuds will blink white lights.
Note: If you want to pair the earbuds with a new or additional Bluetooth device, make sure to turn off Bluetooth on any previously connected device before turning it on for the new device. The earbuds will automatically enter Bluetooth pairing mode when taken out of the case.
For more information and troubleshooting tips, you can refer to the user manual provided with the JLAB B09RG6D2B7 Go Air Sport Earbuds.
Add New Comment