User Manual Q&AAnswer
Mar 04, 2025 - 03:52 AM
To clean the beper P204CAL200 Continuous Cycle Steam Station, follow these steps:
1. Remove the plug from the socket and ensure that the iron has cooled down.
2. To remove encrustations or starch residues from the soleplate, use a damp cloth or a non-abrasive detergent while the soleplate is still hot. For stubborn stains, there are special detergents available. Always dry the soleplate after each cleaning.
3. Clean the body of the iron with a damp cloth without detergents. Do not use metal wool pads or abrasive detergents.
4. If the anti-calcium cartridge needs to be replaced, it should be done every 6 to 12 months based on the hardness of the water used. Refer to the manual for instructions on how to replace the cartridge.
Please note that these cleaning instructions are based on the information provided in the user manual for the beper P204CAL200 Continuous Cycle Steam Station.
Add New Comment