Answer

Mar 04, 2025 - 03:35 AM
To assemble the Anslut 003590 Portable Table Lamp, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Start by removing the plastic covering from the lamp before use.
2. Ensure that the lamp is intended for indoor use only.
3. Do not connect the lamp to the mains while it is still in the packaging.
4. Check that the bulb holder has a light source before connecting the lamp to the mains supply.
5. The power cord of the lamp is not replaceable. If it gets damaged, discard the entire product.
6. Make sure to keep the lamp away from children and prevent them from playing with the plastic packaging to avoid the risk of suffocation.
7. For new installations or extensions to existing systems, it is recommended to have an authorized electrician carry out the work. However, if you have the necessary knowledge, you can replace switches, power points, fit plugs, extension cords, and sockets. Incorrect installation can lead to fatal injuries and fire hazards.
8. The lamp is classified as Safety class II and is approved as per applicable directives.
9. When disposing of the product, make sure to recycle it in accordance with local regulations.
10. The technical data of the lamp includes a rated voltage of 230 V ~ Hz, a maximum output of 25 W, safety class II, protection rating IP20, socket E14, suitable for light sources with energy class A++ to E, and a cord length of 1.8 m.
11. Refer to the provided illustration in the manual (FIG. 1) for specific installation instructions.
By following these instructions, you should be able to assemble and use the Anslut 003590 Portable Table Lamp safely and effectively.
Add New Comment