How do I properly clean and maintain the CHAPIN 2 Gallon Industrial Acetone Sprayer? (CHAPIN 2 Gallon Industrial Acetone Sprayer User Manual)

Answer

manuals.plus

Mar 04, 2025 - 03:18 AM


Proper cleaning and maintenance are essential for the safe and effective use of the CHAPIN 26127 2 Gallon Industrial Acetone Sprayer. Here are the steps to clean and maintain the sprayer:

1. Cleaning:
- Follow the chemical manufacturer's instructions for cleaning. Rinse the sprayer thoroughly with the recommended solvent.
- After each use, be sure to thoroughly rinse the wand and nozzle with the recommended solvent.
- Open the shut-off and allow the recommended solvent to run through the discharge assembly.
- Release the pressure in the tank (follow the Pressure Release Instructions), remove the pump, and empty the sprayer.
- If needed, wash the diaphragm in mild dish detergent. Tighten the plunger clockwise until flush to the top of the shut-off body. Do not overtighten.
- Store the sprayer tank upside down, with the pump removed, in a warm dry location.

2. Maintenance:
- Periodically oil the pump by dropping 10-12 drops of light oil down the pump rod through the opening in the cover.
- Inspect all metal parts, including the wand, nozzle, and fittings, for rust, corrosion, and pitting. If any of these conditions are found, replace the affected part with the original manufacturer's part before using.

By following these cleaning and maintenance instructions, you can ensure the longevity and proper functioning of your CHAPIN 26127 2 Gallon Industrial Acetone Sprayer.