User Manual Q&AAnswer
Mar 04, 2025 - 03:09 AM
To configure the data logger, follow these steps:
1. Power on the logger by pressing the ON/OFF button.
2. Connect the data logger to a PC via the USB port.
3. Open the "PDF Logger Configuration Tool.exe" file.
4. Select the desired language from the options provided.
5. Set the sampling rate, start delay, unit of measurement, password (if desired), company name, alarm types, alarm delay, alarm limits, and time zone according to your requirements.
6. Once all the programming is done, press "Save" to confirm the settings.
7. Close the setup window and disconnect the logger from the PC.
Note: Make sure to program the logger and generate the PDF and Excel report at room temperature. Also, ensure that you have Adobe Reader software installed on your PC to view the generated reports.
Add New Comment