How do I install the OMNITRONIC CST-5,6,808 Ceiling Speaker? (OMNITRONIC CST-5 CEILING SPEAKER User Manual)

Answer

manuals.plus

Mar 04, 2025 - 02:53 AM

To install the OMNITRONIC CST-5,6,808 Ceiling Speaker, follow these steps:

1. Ceiling cutout: Use a saw to create a mounting hole in the ceiling with the correct dimensions. The dimensions are as follows:
- CST-508: 17.2 cm
- CST-608: 20.7 cm
- CST-808: 24.6 cm

2. Preparation: Remove all parts from the packaging and align the frame.

3. Installing the frame:
- Insert the frame into the ceiling cutout.
- Tighten the four mounting screws to secure the frame in place.
- Pull out the speaker cable and ensure there is enough length (plus approximately 30 cm).

4. Making the connections:
- Turn off the PA system.
- Connect the speaker cable to the cable terminals of the speaker.
- When connecting multiple speakers in parallel to a power amplifier, ensure they have the same polarity, minimum impedance (power amplifier), and total load (speakers).

5. Inserting the speaker:
- Insert the speaker into the frame and turn it clockwise.

6. Fixing the speaker:
- Tighten the four mounting screws to secure the speaker in place.

7. Adjusting the tweeter:
- The tweeter can be tilted and rotated for precise alignment.
- A 3-way switch for adjusting the tweeter level is located on the front of the speaker chassis.
- Move the switch to the desired position.
- For a neutral treble level, select the middle position (default).

8. Attaching the front grille:
- Place the front grille on the speaker.
- Magnets integrated into the frame ensure a secure hold.

Please note that these instructions are a summary. For more detailed information and illustrations, refer to the OMNITRONIC CST-5,6,808 Ceiling Speaker User Manual provided with the product.