User Manual Q&AAnswer
Mar 04, 2025 - 02:44 AM
To set up the Cudy WR1200 Dual Band Smart WiFi Router, please follow these steps:
1. If your internet connection is through an ethernet cable directly from the wall, skip steps 1, 2, and 3. Otherwise, turn off your modem and remove the battery if it has one.
2. Connect the router's WAN port to your DSL/Cable modem or ethernet connection.
3. Turn on your modem and wait for about 2 minutes for it to restart.
4. Connect the power adapter to the router.
5. Verify that the LEDs on the router indicate a proper hardware connection.
6. Connect your computer to the router either wired or wirelessly.
- Wired: Turn off the Wi-Fi on your computer and connect it to the router's LAN port using an ethernet cable.
- Wireless: Connect your device to the router's Wi-Fi using the SSID (network name) and password printed on the bottom of the router.
7. Launch a web browser and enter either http://cudy.net/ or http://192.168.10.1/ in the address bar. Use "admin" as the password to log in. If the login window does not appear, please refer to FAQ > Q1 for troubleshooting steps.
8. Follow the step-by-step instructions on the web management page to set up your internet connection.
For more advanced features and configuration options, you can log in to the router's web management page at http://cudy.net/ and refer to the user guide at http://www.cudy.com.
If you encounter any issues or need further assistance, you can contact Cudy's technical support via email at support@cudy.com or visit their support page at http://www.cudy.com/support
Add New Comment