Answer

Mar 04, 2025 - 02:42 AM
To install the LUMENA Radiata Sleeper Timber Pine Path Light 240v, please follow these steps:
1. Ensure that you have a competent and qualified electrician to install the light fitting as it is a Class 1 product and must be earthed.
2. Install the light fitting in accordance with IEE wiring regulations and current Building Regulations.
3. Switch off the mains supply before installing or maintaining the fitting to prevent electrocution. Make sure that other persons cannot restore the electrical supply without your knowledge.
4. Connect the light fitting to a circuit with a 30Ma RCD (Residual Current Device) fitted for added safety.
5. If you are replacing an existing fitting, make a careful note of the connections before removing it.
6. Always switch off the mains and allow the fitting to cool before commencing any electrical work or changing the bulb.
7. Use the correct type and wattage of bulb for the light fitting. Never exceed the stated wattage.
8. Make all connections as watertight as possible to avoid electrical shortage.
9. The light fitting may get warm while in use for a period of time.
For more detailed instructions and information, please refer to the provided manual or contact the manufacturer directly.
Add New Comment