User Manual Q&AAnswer
Mar 04, 2025 - 02:37 AM
To connect the Lenovo ThinkVision P24q-30 monitor to your computer, follow these steps:
1. Make sure your computer is turned off.
2. Locate the video output ports on your computer. These are usually located on the back of the computer and may include HDMI, DisplayPort, or VGA ports.
3. Choose the appropriate video cable that matches the video output port on your computer and the video input port on the monitor. The ThinkVision P24q-30 monitor supports HDMI, DisplayPort, and VGA connections.
4. Connect one end of the video cable to the video output port on your computer.
5. Connect the other end of the video cable to the corresponding video input port on the ThinkVision P24q-30 monitor.
6. Tighten the screws on the video cable connectors to ensure a secure connection.
7. Connect the power cord to the power input port on the monitor and plug the other end into a properly grounded power outlet.
8. Turn on your computer and the monitor.
Once the connections are made and the monitor is powered on, your computer should detect the monitor and display the video output on the ThinkVision P24q-30 screen. If you encounter any issues, refer to the troubleshooting section in the user manual or contact Lenovo support for further assistance.
Add New Comment