User Manual Q&AAnswer
Mar 04, 2025 - 02:25 AM
Yes, you can change the direction of the door opening on your Summit Household refrigerator freezer. Here are the steps to follow:
1. Remove the upper hinge cover from the door and remove the screws that hold the top hinge.
2. Lift the hinge straight up to free the hinge pin from the socket in the top of the door.
3. Lift the door up and away to free its bottom socket from the hinge pin.
4. Remove the screws from the bottom hinge.
5. Remove the decorative caps from the opposite side and plug the holes from the original side with the decorative caps.
6. Move the bottom hinge to the opposite side and tighten the screws. Use any lock washers or nuts if they were installed in the original installation.
7. Replace the door onto the hinge pin on the bottom hinge. Place the top hinge pin into the door. Insert screws into the top hinge and tighten.
8. Check the gasket. It should not be creased and should seal well.
Please refer to the user manual for visual illustrations and additional information.
Add New Comment