User Manual Q&AAnswer
Mar 04, 2025 - 02:21 AM
To connect the Digalox DPM72-AV2 USB Interface to your PC, follow these steps:
1. Plug the USB interface card into the position marked "USB EX2" on the circuit board of the Digalox DPM72-AV2. Make sure that all pins of the card are securely plugged into the socket.
2. Use a USB cable with a USB Micro-B plug to connect the USB interface to your PC. The USB Micro-B plug should be inserted into the USB port of your PC.
3. Once the connection is established, you can use the corresponding configuration software called "Digalox Manager" to configure the device. You can download the software from the official Digalox website at www.digalox.com.
Please note that when the USB port is connected, only voltages lower than 50 V should be applied to the measurement inputs. The USB port is not isolated from the measurement circuit, so it is important to ensure the safety of the connected voltages.
For further information or assistance, you can refer to the instruction manual provided with the Digalox DPM72-AV2 USB Interface or contact TDE Instruments GmbH through their contact information mentioned in the manual.
Add New Comment