User Manual Q&AAnswer
Mar 04, 2025 - 02:09 AM
To program the remote control for The Big Fan v2, follow these steps:
1. Turn off the power to the fan at the isolation or wall switch and wait for 30 seconds.
2. Turn the power back on at the isolation or wall switch. The fan will beep once.
3. Press and hold the "Forward/Reverse" button on the remote control until you hear one beep from the receiver. The remote control will now be linked to the fan.
4. You can pair up to two handsets with each fan, and the same handset can control multiple fans.
If you have any further questions or need assistance, please refer to the instruction manual or contact the Hunter Pacific Technical Advice Line at 1300 360 280.
Add New Comment