User Manual Q&AAnswer
Mar 04, 2025 - 02:08 AM
To charge the REALPOWER PB-20000 PD Pro powerbank, follow these steps:
1. Connect the supplied 100 W USB-C charging cable to the USB-C port of the powerbank.
2. Connect the other end of the cable to a charger. It is recommended to use a PD-capable charger with 65 watts for faster charging.
3. The powerbank will automatically start charging itself. The charging status is indicated by the LEDs on the powerbank.
- LED light up = 0% - 25%
- LEDs light up = 26% - 50%
- LEDs light up = 51% - 75%
- LEDs light up = 76% - 100%
4. The LEDs will automatically switch off after 5-6 seconds if the powerbank is not active.
5. The ".PD" LED will only light up blue when a USB PD-capable device is connected.
6. The integrated overcharge protection will stop the charging process when the battery is fully charged.
Please note that it is important to use a suitable power adapter and to not charge any devices with the powerbank while it is charging itself.
Add New Comment