Answer

Mar 04, 2025 - 02:07 AM
To install accessories on the BOSCH RH850VC and RH745 Hammer Drill, follow these steps:
1. Clean the insert shank end of the accessory to remove any debris, then lightly grease it with a light oil or lubricant.
2. Insert the accessory into the tool holder through the dust shield, while twisting and pushing inward until it locks automatically into place. Pull outward on the accessory to ensure it is locked into the tool holder.
3. To remove an accessory, pull and hold the locking sleeve backward and pull the bit forward. All accessories should be wiped clean after removing.
Note: It is important to use sharp and undamaged accessories to obtain the high efficiency available from the rotary hammers. Maintaining sharp and undamaged accessories will save time in operating the tool.
Please refer to the manual for more detailed instructions and safety precautions.
Add New Comment