User Manual Q&AAnswer
Mar 04, 2025 - 01:55 AM
To mount the HFCL ion4I3_CPE UBR on a pole, follow these steps:
1. Attach the hood to the UBR using four M6 flange nuts. Make sure the cut in the hood aligns with the lug connector.
2. Attach the pole clamp assembly to the UBR using three M6 hex bolts and split spring lock washers.
3. Mount the assembly from the previous step onto the UBR using three M6 hex bolts and split spring lock washers.
4. Once the UBR is assembled, mount it on the pole using two MS x 220 bolts, four split spring lock washers, and flat washers.
5. Slightly loosen the M6 bolts, rotate the brackets to align the pointer mark at an optimum angle for azimuth and elevation. Once the desired setting is attained, securely tighten the six bolts using a compatible spanner.
For visual reference, please consult the user manual on the HFCL website (io.hfcl.com) for detailed information on mounting the UBR.
Add New Comment