User Manual Q&AAnswer
Mar 04, 2025 - 01:47 AM
To charge the battery pack, follow these steps:
1. Remove the battery pack from the handle by pressing the push lock buttons downwards.
2. Check that your mains voltage matches the voltage marked on the rating plate of the battery charger.
3. Insert the power plug of the charger into a mains socket outlet. The green LED on the charger will start flashing.
4. Push the battery pack onto the battery charger.
5. Refer to the charger indicator section in the manual for an explanation of the LED indicator on the charger. The LED indicator will show the charge status of the battery.
6. If the battery pack fails to charge, check if there is voltage at the socket outlet and if there is proper contact at the charging contacts on the charger.
7. If the battery still fails to charge, contact the Customer Service Department for further assistance.
Note: It is important to recharge the battery pack promptly when you notice a drop in the device's performance. Never allow the battery pack to become fully discharged as it may develop a defect.
Add New Comment