User Manual Q&AAnswer
Mar 04, 2025 - 01:36 AM
To connect the KARCHER BP 2 Garden Water Pump, follow these steps:
1. Remove the plug from the pump.
2. xxxx the connection adapter into the suction connection of the pump (inlet). Tighten it manually.
3. Connect the vacuum-proof suction hose to the pump. Depending on the degree of soiling of the fluid to be delivered, you may need to use a pre-filter.
4. Fill the pump with water via the delivery connection until it is overflowing.
5. xxxx the connection adapter into the delivery connection of the pump (outlet). Tighten it manually.
6. Connect the delivery line to the pump.
Once the pump is connected, you can insert the mains plug into the socket and switch on the appliance using the ON/OFF switch. Make sure to lift the delivery hose approximately 1m to reduce the suction time. Wait until the pump xxxx in and transports water uniformly.
Please refer to the manual for more detailed instructions and safety precautions.
Add New Comment