How do I install the OVE Kevan Semi-Flush Mount LED Integrated light fixture? (OVE Kevan Semi-Flush Mount LED Integrated Instruction Manual)

Answer

manuals.plus

Mar 04, 2025 - 01:30 AM


To install the OVE HDLI015 Kevan Semi-Flush Mount LED Integrated light fixture, please follow these steps:

1. Disconnect the power: Before starting the installation, turn off the circuit breaker or remove the fuse at the fuse box to disconnect the power.

2. Uninstall the mounting plate: Rotate the bolts on the nuts counterclockwise to remove the mounting plate (A).

3. Pass the electrical wire: Pass the electrical wire of the lamp (D) through the tube (C) and the canopy (B).  xxxx  the canopy (B), the tube (C), and the lamp (D) together.

4. Joint the wires: Pass all wires through the mounting plate (A). Use a twist-cap connector (AA) to join the ground wire to the ground wire of the mounting plate (A). Use twist-cap connectors (AA) to join the neutral wire (N) and load wire (L) to your neutral and load wires from the junction box, respectively.

5. Securely install the mounting plate: Tighten bolts (CC or DD) with washers (BB) and nuts (EE) onto the junction box to securely install the mounting plate (A). Choose bolts (CC or DD) based on your junction box.

6. Reinstall the mounting plate: Tighten nut (FF) to the canopy (B) to reinstall the mounting plate (A).

For more detailed instructions and illustrations, please refer to the installation manual provided with the product.

Note: It is recommended to consult a qualified electrician if you have any doubts or questions about the installation of this fixture.