User Manual Q&AAnswer
Mar 04, 2025 - 01:22 AM
To adjust the friction on the , follow these steps:
1. Locate the set xxxx on the body of the wrist. This set xxxx is used to adjust the friction.
2. Using an Allen wrench (specified in the manual), loosen the set xxxx to reduce the friction or tighten it to increase the friction.
3. Test the friction by rotating the terminal device to the desired position. If the friction is too loose, tighten the set xxxx slightly. If the friction is too tight, loosen the set xxxx slightly.
4. Continue adjusting the set xxxx until you achieve the desired level of friction.
Note: Before adjusting the friction, make sure to insert a terminal device with a ½-20 thread into the wrist. Do not tighten the friction xxxx without the terminal device inserted.
For more detailed instructions and safety precautions, please refer to the Fillauer WE and OW Friction Wrists User Manual provided.
Add New Comment