User Manual Q&AAnswer
Mar 04, 2025 - 01:19 AM
To install the ONE FOR ALL WM4629 Solid TV Wall Mount, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before starting the installation, make sure you have all the necessary tools and materials, including a drill, screwdriver, level, and measuring tape.
2. Choose a suitable location on the wall for mounting your TV. Ensure that the wall is made of solid wood, bricks, concrete, or solid-wood columns with a maximum of 3 mm wall finishing. If your wall is made of other materials, such as hollow bricks, consult a professional installer or specialist supplier for advice.
3. Use a stud finder to locate the studs in the wall. It is recommended to mount the TV bracket to the studs for maximum stability.
4. Hold the wall plate against the wall at the desired height and use a level to ensure it is straight. Mark the positions for the mounting holes on the wall using a pencil.
5. If mounting to studs, drill pilot holes at the marked positions using an appropriate drill bit. If mounting to other materials, follow the instructions provided by your installer or specialist supplier.
6. Attach the wall plate to the wall using the provided screws and wall plugs. Make sure the screws are securely tightened.
7. Attach the TV brackets to the back of your TV using the provided screws. Make sure they are securely tightened.
8. Lift the TV and align the brackets with the wall plate. Slide the TV brackets onto the wall plate until they lock into place.
9. Ensure that the TV is level and adjust if necessary.
10. Double-check that all screws and connections are tightened properly.
Please note that correct installation is crucial for the safety and stability of your TV. If you have any doubts or concerns, it is recommended to consult a professional installer for assistance.
For more detailed instructions and illustrations, please refer to the ONE FOR ALL WM4629 Solid TV Wall Mount Installation Guide provided with your product.
Add New Comment