User Manual Q&AAnswer
Mar 04, 2025 - 01:17 AM
To install the ET2 E23400 Baritone LED Bath Vanity, follow these steps:
1. Prior to installation, install the back plate or mounting plate on the junction box with the provided junction box screws. Make sure to drive the screws completely to the end of the junction box.
2. Connect the supply wires to the wires on the fixture using wire nuts. Connect white to white, black to black, and green to green for grounding connection.
3. Select the desired Color Temperature by setting the sliding switch to the target CCT. Refer to Figure 2 or Figure 4 in the instruction manual for the location of the sliding switch.
4. Install the fixture on the mounting plate using the fixture screws provided.
Please refer to the instruction manual for detailed diagrams and illustrations of the installation process. Make sure to follow all safety precautions and guidelines mentioned in the manual.
Add New Comment