User Manual Q&AAnswer
Mar 04, 2025 - 01:12 AM
To assemble and set up the AXIOM AX16CL Floor Stand High Power Passive Portable Line Array Element, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Start by removing the xxxx (A) from the column and xxxx it into the base. Loosen the xxxx (E).
2. Place the first column (B) onto the base.
3. Insert the front pin (C) into the designated slot on the column.
4. Insert the rear pin (D) into the desired aiming position on the base.
5. Tighten the knobs (A) and (E) to secure the first column.
6. Loosen the knobs (H) and (L).
7. Place the second column (I) on top of the first column.
8. Insert the front pin (F) into the designated slot on the second column.
9. Insert the rear pin (G) into the desired aiming position on the base.
10. Tighten the knobs (H) and (L) to secure the second column.
Please note that it is important to ensure the ground where the floor stand is placed is stable and compact. Use a spirit level to make sure the floor stand is perfectly horizontal. Also, always secure ground stacked setups against movement and possible tipping over.
It is important to follow all safety guidelines and regulations when installing and using the product. If you have any further questions or need additional information, it is recommended to contact the manufacturer, Proel, for further assistance.
Add New Comment