How do I install the advidia Dome Gooseneck Bracket Mount? (advidia Dome Gooseneck Bracket Mount User Guide)

Answer

manuals.plus

Mar 04, 2025 - 01:03 AM


To install the advidia M-PARAPET PTZ Dome Gooseneck Bracket Mount, please follow the steps below:

1. Ensure that you have all the necessary tools and equipment for installation, including screws, anchors, and a drill.

2. Identify a suitable location on the parapet or wall where you want to mount the bracket. Ensure that it provides a stable and secure base for the PTZ dome camera.

3. Use the provided template or measurements to mark the positions for drilling holes on the wall or parapet.

4. Drill the necessary holes according to the marked positions. Make sure to use the appropriate drill bit size for the anchors you are using.

5. Insert the anchors into the drilled holes. Ensure they are securely in place.

6. Align the bracket with the drilled holes and attach it to the wall or parapet using the provided screws. Tighten the screws securely, but avoid over-tightening.

7. Once the bracket is securely mounted, follow the instructions provided with your PTZ dome camera to attach it to the bracket. Ensure that the camera is properly aligned and tightened.

8. Double-check the stability and positioning of the bracket and camera to ensure it meets your requirements.

Please note that these instructions are a general guideline. For specific installation details and any additional considerations, refer to the user guide provided with the advidia M-PARAPET PTZ Dome Gooseneck Bracket Mount.