User Manual Q&AAnswer
Mar 04, 2025 - 12:59 AM
To adjust the pressure and size of the jet when using the Washing Spray Gun, follow these steps:
1. Fill the bowl (1) with the liquid and xxxx it to the body of the gun (2).
2. Connect the air hose to the inlet fitting (3) of the gun.
3. Press the lever (4) to spray the liquid.
4. To adjust the size of the jet, use the ring nut (5) labeled A-B. Tighten the ring nut for a smaller jet size and loosen it for a larger jet size.
Important: Always hold the gun horizontally during use to improve the suction of the liquid in the bowl. Also, remember to wear a mask and safety goggles when spraying harmful substances.
Note: The maximum pressure for the Washing Spray Gun is 12 bar.
Add New Comment