User Manual Q&AAnswer
Mar 04, 2025 - 12:52 AM
To change the direction of the Blusafe Breeze Smart Handle, follow these steps:
1. Look at the inside face of the handle and locate the small location xxxx .
2. Push the handle down slightly to relieve pressure and remove the location xxxx .
3. Rotate the handle 180 degrees so that it's pointing the other way. Make sure the spring arm doesn't jump over the pillar that holds the location xxxx .
4. Pull the handle down slightly in its new position to relieve pressure and replace the location xxxx back into its position. Start with either Fig. 2 or 3, then end up with the other one.
5. Repeat the same process on the other handle.
6. Check that both handles now work in the correct direction for your door.
For more detailed instructions, you can refer to the installation guide provided with the Blusafe Breeze Smart Handle.
Add New Comment