User Manual Q&AAnswer
Mar 04, 2025 - 12:44 AM
To connect the MultiPlus-II inverter/charger to your batteries, follow these steps:
1. Ensure that you have the recommended battery capacity and battery cables with sufficient cross-section.
2. Undo the two screws at the bottom of the enclosure and remove the service panel.
3. Connect the battery cables to the appropriate terminals on the printed circuit board. Refer to Appendix A in the instruction manual for the terminal block layout.
4. Tighten the nuts well for minimal contact resistance.
It is important to follow these steps carefully to ensure a proper and safe connection between the MultiPlus-II and your batteries. For more detailed information and illustrations, please refer to the instruction manual provided by Victron Energy.
Add New Comment