User Manual Q&AAnswer
Mar 04, 2025 - 12:33 AM
To secure the HILTI DD 160 Diamond Core Drill to the drill stand, follow these steps:
1. Remove the end stop xxxx from the end of the rail.
2. Set the diamond core drilling machine on the rail using the opening provided.
3. Lock the diamond core drilling machine by fully tightening the carriage lock.
4. Check that the diamond core drilling machine is locked by lightly turning the hand wheel.
5. Install the end stop on the rail and check that it is secure.
Make sure to always use a drill stand when using the diamond core drilling machine and ensure that the drill stand is securely anchored in the base material by an anchor base plate or vacuum base plate.
Add New Comment