User Manual Q&AAnswer
Mar 04, 2025 - 12:30 AM
To charge the battery of the HILTI AG 5D-22 Cordless angle grinder, follow these steps:
1. Before charging the battery, make sure that the contacts on the battery and the contacts on the charger are clean and dry.
2. Use an approved charger to charge the battery. Refer to the operating instructions for the charger for specific charging instructions.
3. Insert the battery into the charger, ensuring that it is properly aligned and seated securely.
4. Plug the charger into a power outlet.
5. The charger will indicate the charging status of the battery. Refer to the charger's operating instructions for the specific indicators and their meanings.
6. Allow the battery to charge fully before using it for the first time. The charging time will vary depending on the battery's state of charge and the charger model.
7. Once the battery is fully charged, remove it from the charger and insert it into the angle grinder.
Note: It is important to only use Hilti Nuron lithium-ion batteries of the B 22 series and Hilti chargers specified for these batteries. Using incompatible batteries or chargers may result in damage to the battery or the angle grinder.
Add New Comment