User Manual Q&AAnswer
Mar 04, 2025 - 12:22 AM
To connect your STRONG SRT 8208 Digital Terrestrial HD Receiver to your TV, follow these steps:
1. Make sure your TV is turned off and both the receiver and TV are unplugged from the power source.
2. Connect one end of the HDMI cable to the HDMI port on the back of the receiver.
3. Connect the other end of the HDMI cable to the HDMI port on your TV.
4. If your TV does not have an HDMI port, you can use a SCART cable instead. Connect one end of the SCART cable to the TV SCART port on the back of the receiver and the other end to the SCART port on your TV.
5. Plug in the power cord of the receiver and the TV to the wall outlet.
6. Turn on your TV and set it to the correct HDMI input or SCART input.
7. Turn on the receiver by pressing the power button on the front panel or using the remote control.
8. Follow the on-screen instructions to complete the initial setup of the receiver.
Once the setup is complete, you should be able to watch digital terrestrial TV channels on your TV through the STRONG SRT 8208 Digital Terrestrial HD Receiver.
Add New Comment