How do I install the Leonton GINJ-0201-BT Industrial Gigabit PoE++ Injector? (Leonton Industrial Gigabit PoE++ Injector User Manual)

Answer

manuals.plus

Mar 04, 2025 - 12:15 AM

To install the Leonton GINJ-0201-BT Industrial Gigabit PoE++ Injector, follow these steps:

1. Unpack the industrial injector from the original packing box.
2. Check if the DIN-Rail bracket is screwed on the industrial injector. If not, refer to the DIN-Rail Mounting section for installation instructions. If you want to wall mount the injector, refer to the Wall Mounting section.
3. Hang the industrial injector on a DIN-Rail or wall according to the Mounting Installation section.
4. Power on the industrial injector and check if the power LED light turns on. If you need help with wiring the power inputs, refer to the Wiring the Power Inputs section. The LED Indicators section provides information on LED light indication.
5. Prepare a twisted-pair, straight-through category 5 cable for Ethernet connection.
6. Insert one side of the RJ-45 cable into the injector's Ethernet port and the other side into the networking device's Ethernet port (e.g., switch, PC, or server). The Ethernet port's LED on the injector will turn on when the cable is connected to the networking device.
7. Once all connections are set and the LED lights show normal, the installation is complete.

Please note that if the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. The responsibility for the safety of any system incorporating the equipment lies with the assembler of the system. For further troubleshooting or technical support, please contact Leonton Technologies.