User Manual Q&AAnswer
Mar 03, 2025 - 11:50 PM
To install the GAMA SONIC 214001 Stainless Steel Bollard Solar Lamp with EZ Anchor, follow these steps:
1. Flat surface installation:
- Use the Adaptor as a template and drill two holes in the desired mounting location.
- Insert the anchors into the holes and secure the Adaptor using the provided screws.
- Attach the assembled lamp to the Adaptor and secure it with the silver caps.
2. EZ Anchor installation:
- Insert the Auger bit into the Adaptor and secure it from the bottom using the four supplied screws.
- Place the Turning bar in the hole through the Auger bit and start turning the Auger clockwise in the desired mounting location.
- Apply downward pressure while turning clockwise and periodically check the level in the Auger to ensure it is vertical.
- Stop turning once the Ground Stop Ring is flush with the ground.
- Remove the turning bar and place the assembled lamp on the Adaptor.
- Secure the lamp with the two silver caps.
For more detailed instructions and illustrations, please refer to the user manual provided with your purchase.
Note: It is important to ensure that the solar light is placed in a spot where it will receive maximum direct sunlight throughout the day for optimal performance.
If you have any further questions or need additional assistance, you can contact GAMA SONIC's technical support at their Toll-Free number: 800-835-4113 (within the US) or visit their website for more information.
Add New Comment