User Manual Q&AAnswer
Mar 03, 2025 - 11:36 PM
To set the address of the TZ-CT01 CO₂ Transmitter, you can use the DIP switch located on the device. The DIP switch has 8 positions, numbered from 1 to 8. Each position corresponds to a value (128, 64, 32, 16, 8, 4, 2, 1). To set the address, you need to turn on the corresponding positions of the DIP switch according to the desired address code. For example, if you want to set the address code to 176, you need to turn on positions 1, 3, and 4 of the DIP switch (128 + 32 + 16 = 176).
To set the baud rate of the TZ-CT01 CO₂ Transmitter, you can use a serial port assistant. The available baud rates are 4800bps and 9600bps. You can specify the desired baud rate when ordering the device, and it will be preset for you. Alternatively, you can modify the baud rate yourself using the serial port assistant.
Please refer to the user manual for more detailed instructions and illustrations on setting the address and baud rate of the TZ-CT01 CO₂ Transmitter.
Add New Comment